35
Item Description
IRIS IRIS is used to adjust the amount of light reaching the image sensor for best image results.
When the shutter speed is selected to a certain value, the iris mode is switched to “AI”.
Please adjust the image brightness here when necessary.
Day and Night This function is used to configure the day and night mode:
Day - Always stay in the day mode (color).
Night - Always stay in the night mode (B/W).
Image - Automatically switch based on the light condition of the image captured
Time – Select this option, and click “Day and Night” in blue to enable and set a schedule to
enable day and night mode. The selected time (yellow) will be in the day mode, and the
unselected time will be in the night mode.
Digital Input N.O. – Normally stay in the day mode, and switch to the night mode when the alarm
is triggered.
Digital Input N.C. – Normally stay in the night mode, and switch to the day mode the when alarm
in triggered.
Defog Select “ON” to enable the defog function in poor weather conditions such as fog, smog or
smoke. The captured image can be improved.
Auto Focus
Calibration
Select “Start” to start calibrate focus automatically.
Home
Configure the camera to return to the specified point or specific cruise action when the camera is not in
use for a specific time.
4.3.3 VA
TA
TA, tampering alarm, should be used with the mini-guard control switch for alarm system integration.
For more details, please check with your distributor or installer.
DIS
DIS, digital image stabilization, is used to reduce blurring associated with the motion of a camera
during exposure.
To Next Page
Loading...
Need help?
General
