MAIN MENU
29
5) BACKUP
Click “SUBMIT” to start backup. You’ll see a log file (.csv) in the flash drive. You may open it with any txt
editor, such as NotePad.
6.2.6 REGULAR REPORT
This function is used to send event reports to the specified E-mail address. Users could configure up to 5 profiles
to receive different reports about specific channels at different time.
Note: This function is available only when a hard disk is installed, and the DVR is connected to Internet.
SYSTEM
ACCOUNT PROFILE 1
TOOLS ACTIVE ON
SYSTEM INFO PERIOD DAILY
BACKUP DATA DAY OF MONTH 1
BACKUP LOG HOUR 1
REGULAR REPORT CHANNEL CH1
E-MAIL SETUP
EXIT
Step1: Select the profile you want to configure, and enable it.
Step2: Select the frequency to send reports in “PERIOD”: DAILY / MONTH / WEEK.
Step3: When MONTH or WEEK is selected, select which date or day from “DAY OF MONTH” or “DAY OF WEEK”.
Step4: Then, select which time you want to receive reports, which channel(s) you want to see, and which event
type(s) you want to see (ALARM / MANUAL / MOTION / SYSTEM / TIMER / INFLOW / OUTFLOW /
VIRTUAL FENCE / ONEWAY / SCENE CHANGE).
Step5: Configure the email address to receive reports.
Note: The sender E-mail should be configured in “ADVANCED CONFIG” “NETWORK” “E-MAIL” for
this function to work properly. For details, please refer to “E-MAIL” at page 35.
6.3 EVENT INFORMATION
6.3.1 QUICK SEARCH
EVENT INFORMATION
QUICK SEARCH
To Next Page
Loading...
Need help?
General
