NETWORK
CH01 ALARM OFF / INTERNAL ALARM CH1
DISPLAY
CH02 ALARM OFF CH2
RECORD
CH03 ALARM N.O. office
DEVICES
CH04 ALARM OFF CH4
DCCS
IVS
NOTIFY
EXIT
1) RESET ALL GUARD CONNECTION
When there’re more than 2 users who have the authority to enable Push Video on their mobile devices and
configure its related settings, it might be confusing to know whose command is working. In this case, use this
function could force the camera to discard all Push Video setup and reconfigure it.
2) GUARD TRIGGER BY
Specify which alarm device (alarm-in) should be used when GUARD is enabled from your iOS or Android
mobile device.
3) ALARM TYPE
Select the external alarm type to “ALARM NO.”, “ALARM N.C.” and “INTERNAL ALARM”.
4) CH01 ~ 04
Enter the text you want to see when your iOS or Android mobile device receives Push Video. The default
text is the channel number.
PUSH STATUS
Before using this function, make sure:
You have an iOS or Android mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “7.2 Mobile Devices” at page 錯誤! 尚未
定義書籤
。.
You have configured EagleEyes to access this DVR, and “Guard” is enabled. For details, please refer to “APPENDIX 3 SET PUSH
VIDEO” at p
age 63.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CANERA
PUSH VIDEO PUSH STATUS MESSAGE MAIL
To Next Page
Loading...
