AxelTech YOUPLAY - Page 17

ENG
| HOW TO USE YOUPLAY
17
Change or correct the audio level of the current clip in rec.
Dropped frames. The Max value is settable from settings
Recording parameters
IDR = Instant
ADR = Average
If NDI is enable, it is possible to choose the Video Line-In.
Allows to listen the audio of the rec from the default Windows
audio card.
Adds an IP stream.
By clicking the gear you can open the setting form where is
possible to define the streaming profile.
The Switch button creates a new video segment and close the
previous one.
Starts the recording
Stops the recording
Name of the clip