ENG
In this column you can read the playlist duration.
In this column you can read the playlist type. It is possible to edit it by doubleclicking on the playlist TYPE
in this tab. You can choose between WAIT and CUT.
- in the event that the STARTTIME of the playlist is set before the ENDTIME of the previous one
and
If WAIT is selected, the playlist ignores its own STARTTIME and it waits for the end of the previous
one.
- in the event that the STARTTIME of the playlist is set before the ENDTIME of the previous one
and
if CUT is selected, the playlist does not wait for the end of the previous one, but cuts the previous
one and starts at the established STARTTIME.
This descriptor shows to the user the number of clips inside the Playlist
By clicking on OK you confirm the PLAYLISTS SCHEDULER changes and settings. Changes will be immediately
applied.
HOW TO PREPARE A CLIP TO BE PLAYED
All the clips with the green button are ready to be played.
The different colours give information about the state of the clip:
GREEN = Ready
YELLOW = Preparing
RED = Error
To prepare a clip ready to be played, click on the button. The CUE button will change into PLAY
button to show that the clip is ready to be played.
It is possible to prepare ALL the clips of the playlist by enabling the button WARNING: Preparing
ALL the clips will cause a larger use of memory and the system could become slower.
It is also possible to select some clips to be ready by clicking on the button.
2.4 CLIPS OPTIONS
Here a description of all the options that can be applied to the clips on the playlist
Name of the clip
To Next Page
Loading...