Page 14 AXIS 233D Installation Guide
Set the password
When accessing the AXIS 233D for the first
time, the ‘Configure Root Password’ dialog
will be displayed.
1. Enter a password and then re-enter it,
to confirm the spelling. Click OK.
2. Enter the user name root in the
‘Connect to ...’ dialog.
Note: The default administrator user name root cannot be deleted.
3. Enter the password as set above, and click OK. If the password is lost, the AXIS 233D
must be reset to the factory default settings. See page 21.
4. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of
the video stream in Internet Explorer. You will need administrator rights on the
computer to do this.
The Live View page of the AXIS 233D is displayed, with links to the Setup tools, which allow
you to customize the camera.
Setup - Provides all the tools for configuring
the camera to requirements.
Help - Displays
online help on all
aspects of using
the camera.
To Next Page
Loading...
Need help?
General
