17
AXIS 233D - Configuring the Network Dome Camera
Configuring the Network Dome Camera
This section describes how to configure the AXIS 233D and is intended for the product
Administrator who has unrestricted access to all Setup tools and the Operator who has
access to Video & Image, Audio, Live View Config, Dome Configuration and Event Config.
See the section on
Security, on page 42 for more information on user access control.
The AXIS 233D is configured by clicking on the Setup link from a web browser.
Accessing the Setup Tools
Follow the instructions below to access the Setup Tools from a web browser.
1. Start the web browser and enter
the IP address or domain name
of the AXIS 233D in the
location/address field.
2. The Live View page is now displayed. Click the Setup link on the top right of the
page to display the Setup Tools.
Overview of the Setup Tools
To Next Page
Loading...
Need help?
General
