41
AXIS 233D - Event Config
Examples:
• Avoid triggering on small objects in the video image by setting the object size level to high.
• To reduce the number of triggers if there is a lot of movement during a short period of time, select a high
history level.
• To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is
recommended.
Port Status
Under Event Config > Port Status there is a list that shows the status for the connected
inputs and outputs of the AXIS 233D for the benefit of the Operator who cannot access the
System Options section.
Example: If the Normal state for a push button (such as a doorbell) connected to an input is set to Open circuit
- as long as the button is not pushed, the state is inactive. If the button is pushed, the state of the
input changes to active.
To Next Page
Loading...
Need help?
General
