8
AXIS 233D - Product Overview
Serial number - This number is located on the product label at the base of the camera and
is used during installation, and during restoration of factory default settings. Included in
the package is an extra product label; keep this safe for future reference.
Restart button - This button power cycles the camera and is to be used during firmware
upgrade or factory reset.
Control button - Press this button to install the camera using the AXIS Internet Dynamic
DNS Service, or to restore the factory default settings, as described in
Resetting to Factory
Default Settings, on page 55.
Note: AXIS Internet Dynamic DNS Service is a free service from Axis that allows you to quickly install your cam-
era. This requires an Internet connection with no HTTP proxy. See www.axiscam.net for more information.
For instructions on how to install the AXIS 233D refer to the Installation Guide supplied
with the product in printed format, or in PDF format from the Axis web site at
http://www.axis.com
Status LED Indicator
After the startup and self test routines the indicator flashes as follows.
For more indicator flash routines see LED Indicator flash routine, on page 62.
Color Description
Unlit Steady during connection/normal opera-
tion.
Amber Steady during system initialization. Flashes
during firmware upgrade or reset to factory
default.
Amber/red Flashes amber/red if network connection is
unavailable or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 10 sec. for normal
operation after restart.
To Next Page
Loading...
Need help?
General
