Section 4: Using the AXIS 700
AXIS 700 User’s Manual 41
10. At the AXIS 700 user interface, continue as follows:
For a single page/pile of sheets:
a. Press the Send key to scan and transmit the image to
your Web browser.
For multiple pages/piles of sheets:
a. Press the Scan key to scan each page on the flatbed/
each pile of sheets on the sheet feeder.
b. Insert the next page and press the Scan key again.
c. Repeat the procedure until all your pages are scanned.
d. Press the Send key to transmit the image to your Web
browser.
During the scanning this message is displayed on the LCD:
11. When you have pressed the Send key and the transfer of the
scanned image is completed, the AXIS 700 is released for other users
to access.
Notes:
❏ By scanning multiple pages, you can accumulate several “jobs”
into one image file. This applies to TIFF only.
❏ If no operations are performed within five minutes of allocation,
the AXIS 700 returns to its default settings.
6FDQQLQJ
SOHDVH ZDLW
To Next Page
Loading...
