EasyManuals Logo

Axis P3301 User Manual

Axis P3301
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
AXIS P3301 Fixed Dome Network Camera
Detectors
Detectors
Camera Tampering
Camera Tampering c an generate an al arm whenever the camera is repositioned, or when the lens is covered, sprayed or severely
defocused. To send an alarm, for example an email, an action rule must be set up.
To congure tampering:
1. Go to Detectors > Camera Tampering.
2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help prevent false
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm should be ge nerated if lights are dimmed or turned off, or if the lens is sprayed,
covered, or rendered severely out of focus.
4. Click Save.
To congure the product to send an alarm when tampering occurs:
1. Go to Events > A ction Rules.
2. Click Add to set up a new action rule.
3. Enter a Name for the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tampering from the list of detectors.
6. Optionally, select a schedule and set additional conditions.
7. Select the action. To send an email, sel ect Send Notication a
nd select a Recipient from the list of dened rec ipients.
Note
The While the rule is active option under Duration cannot be used with camera tampering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untrigge red state.
For more information on actions rules, see Events, on page 26.
Motion Detection
Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude
windows can be co ngured:
Include windows target specic areas within the whole video image
Exclude windows —dene areas within an Include window that should be ignored (areas outside Include windows
a
re automatically ignored)
Once congured, motion detection windows appear in the list of Detectors in Action rule setup. S ee Setting Up an Action Rule, on
page 26.
Note
Using the motion detection feature may decrease the product’s overall performance.
22

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis P3301 and is the answer not in the manual?

Axis P3301 Specifications

General IconGeneral
BrandAxis
ModelP3301
CategorySecurity Camera
LanguageEnglish

Related product manuals