AXIS P3301 Fixed Dome Network Camera
Accessing the product
The Live View page
If the Axis product has been customized to meet specific requirements, not all the ite ms de scribed below will ap pea r in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
The Stream Profile drop-down list allows you to select a custom ized or pre-pro grammed stream profile. Stream
profiles are configured under Video & Audio > Stream Profi les.SeeStream Profiles, on page 16.
Click Pulse to activate the output for a defined pe riod of time , such as switching on an exte rnal l
ight for 20 seconds.
Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external light
on and off.
The Manual Trigger button can trigger a n event directly from the Live View pag e. The button is configured under
Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available.
Enable this button from Live View Config > Action Buttons.
The Audio clip drop-down list allows y ou to play an audio clip from the Live View page. Select the audio
clip and click the Play button.
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is available in Intern et Explorer only. See AXIS Media Control (AMC), on page 11 for more
information. The toolbar displays the following buttons:
9
To Next Page
Loading...
Need help?
General
