AXIS P3301 Fixed Dome Network Camera
System Options
System Options
Security
Users
User access control is enabled by default and can be configured under System Options > Security > Users. A n administrator can
set up other users by giving them user names and passwords. It is a lso possible to allow anonymous viewer login, which means
that anybody may access the Live View page.
The user lis t displays authorized users and user groups (access levels):
Viewer - Access to the Live View page
Operator - Access to the Live View page and to all settings except System Options
Administrator - Unrestricted access to all settings; can add, modify and remove other users.
Under HTTP/RTSPPasswordSettings, select the type of password to allow. You may need to allow unencrypted passwords if there
are viewing clients that d o n ot support encryption, or if you upgraded the firmware and existing clients support encryption but need
to log in again and b e configuredtousethisfunctionality.
Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live V iew page.
Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup pr ovides quick access to settings that should be
made before using the Axis product.
ONVIF
ONVIF (Open Network Vid eo Interface Forum) is a global interface standard that makes it e asier for e n d users, inte g rators, consultants,
and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between
different vendor products, increased flexibility, reduced cos
t and future-proof systems.
By creating a user you a u tomatically enable ONVIF c ommu
nication. Use the user name and password with all ONVIF communication
with the product. For more information see www.onvif.org
IP Address Filter
IP address fi ltering is ena ble d on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are
allowed or denie d access to th
e Axis product. Select Allow or Deny from the list a nd click Apply to enable IP address fi ltering.
The administrator can a
dd up to 256 IP addres s entries to the list (a single entry can contain multiple IP addresses).
HTTPS
The Axis product supports encrypted browsing using HTTPS. This is con fi gured on the System Options > Security > HTTPS page.
A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed
certificate to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only
impl
emented after the installatio n of a signed certificate issued by a Certificate Authority.
To obtain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certificate
is returned, click Install signed certificate to import the certificate. The properties of any certificate request currently resident in
the product or installed can be viewed by clicking Properties.
To enable HTTPS in the Axis product, the HTTPS Connection Policy must be set for each user group.
For more information, see the online help
.
31
To Next Page
Loading...
Need help?
General
