AXIS P3301 Fixed Dome Network Camera
Applications
Applications
Third party applications can be uploaded to and installed on the Axis product. For information about available applications,
downloads, trials a nd licenses, go to www.axis.com/applications
To upload an applica tion, go to Applications > Overview, click Browse to locate the file and then click Upload Package. Click on the
uploaded application’s nam e to open the menu options Settings, License and About.Forconfiguration instructions, please refer to
the documentation provided with the application.
Most applications need a license to run. To install the license, select the License menu option. If the product is connected
to the Internet, Automatic Installation appears in the web page. If the product is not connected to the Internet, go to
www.axis.com/applications to acquir e a License key. You will need a license cod e and the product’s serial number (found on the label
and under System Options > Support > System Overview) to receive a license key.
Installed Applications lists instal led applications w ith information about the version and the vendor , the status of the application
(running or not running), and information about the license.
Use the Start and Stop buttons to start and stop the application.
To generate a log file for the a ppli cation, select the application a nd click Log.
Note
It is recommended to run one application at a time. Avoid running applications when motion detection is active.
25
To Next Page
Loading...
Need help?
General
