Model MTG11A/18A/11B/18B/14C System configuration and structure Azbil Corporation
1-4 Model MTG11A/18A, MTG11B/18B, MTG14C
~Note • To use the SFC, read “Chapter 6 : Operation using SFC
communicator” in this manual.
• To use the HART communicator, read “Chapter 7 : Operation
using HART communicator” in this manual.
• Compatible with the SFC of Ver 7.0 or higher. However, some
functions on the main unit cannot be set.
• For DD (device description) of the HART Communicator, use the
HCF DD Library Host DD Distribution (HCF-KIT-III) Release
2010 Number 1, Device Description 1, Device Revision 2 or later.
• This instrument can communicate on two protocols: Smart Field
Communication (SFC) and HART communication (HART
communicator). The communication method to be used is selected
by the (human) data setting device.
When configuring a system using this instrument, it is necessary to determine the
power supply voltage and load resistance to satisfy the operation conditions of this
instrument.
CM2-MTG300-2001.book 4 ページ ２０１５年９月２９日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
