Azbil VDC - Safety Precautions; Verification of Valve Specifications and Precautions on Storage

Safety Guide Azbil Corporation
ii Model MTG11A/18A, MTG11B/18B, MTG14C
2 : Safety precautions
Please read this section before using the valve to ensure proper handling.
WARNING
If the stated procedures are not followed as specied, a potentially hazardous situation
may arise, which could result in death or serious injury.
CAUTION
Failure to observe these cautions may create dangerous conditions that could result in
injury to the personnel and/or in physical damage to the device.
3 : Verication of Valve Specications and Precautions on Storage
3-1 : Unpacking
Control valve is a precision equipment. Handle it with care to avoid damaging it.
When unpacking, check that the following items are in the crate:
• Main valve body, actuator and accessories as ordered,
• Additional equipment as ordered. Installation options
3-2 : Verication of specications
Please check and see if that the process ow uid conditions, and valve Tag No.
agree with the specications that were ordered. The nameplate of each product are
found as shown below. (Other products have their nameplates attached to the identical
positions.)
Figure S-3 Position of nameplate on V Series