User Manual
Page 16 of 52
About the Web User Interface
The Web User Interface is used to configure your router’s settings. The Web
User Interface also allows ADSL subscribers to configure and ready your
internet settings for first use.
Fibre Subscribers, however, need not to configure their Internet Connection
method since these are already pre-configured in ONT devices and are
loaded in your router once connected except for TM Unifi subscribers.
NOTE: Fibre TM Unifi Home still requires a username and password to be
keyed-in.
Accessing the Web User Interface
To access the Web User Interface:
1. Open your web browser.
2. Type-in 192.168.1.254 on the address bar and then press Enter.
3.
You will be prompted to enter a username and password for
authentication. Type
admin
as its username and
admin
as its password
then click Log In.
4. You will be redirected to the Web User Interface of your DSL8800GR(S)
device.
To Next Page
Loading...
Need help?
General
