User Manual
Page 39 of 52
DMZ Host
If a computer is assigned as a DMZ Host, it will receive all the data from the
Internet that does not belong to the list of applications configured in Port
Forwarding.
To enable a DMZ Host IP Address:
1. Enter the LAN IP address of the PC you wish to set as DMZ Host in the
DMZ Host IP Address input box.
2. Click the ‘Save/Apply’ button to apply changes.
If you need to disable the DMZ Host, simply click the Remove button and the
DMZ Host IP Address input box would be empty.
To Next Page
Loading...
Need help?
General
