User Manual
Page 7 of 52
Getting Started
Setting up the device is easy. The flowchart below provides an outline of the
steps needed in order to complete the installation. Brief descriptions appear
beside each step. Detailed instructions are provided in the subsequent
pages.
You may need to check some
settings or disable some applications
before proceeding with the
installation.
Connect the telephone cables,
Ethernet cables, and power
adapter.
For ADSL subscribers, use the Quick
Start Web GUI to setup your PPPoE
connection.
The Web User Interface is primarily
available for ADSL subscribers. Fibre
Subscribers, however, need not to
configure their Internet Connection
method since these are already pre-
configured (except for TM Unifi
subscribers).
Web Interface
Use Quick Setup
You may see the suggested network
setup for ADSL and Fibre Subscribers.
To Next Page
Loading...
