User Manual
Page 34 of 52
Port Start/End" would immediately reflect the keyed values from the
“External Port Start/End” input boxes, vice versa.
3. Enter the Server IP address.
4. Key in or add External Port Starts and Ends, and the Protocols to be
implemented for each port.
5. Click the ‘Save/Apply’ button to apply changes.
To remove a port forwarding rule:
1. On the Port Forwarding List, tick the checkbox that corresponds to the
rule that you want to remove.
2. Click the ‘Remove’ button to remove the rule.
To Next Page
Loading...
