Bacharach MZ-RD - Setup Programming; Setting the Clock; Navigating to the; St MZ-RD Setup Screen

MZ-RD – Multi-Zone Remote Display
12 Instruction 3015-5157
3.3. Setup Programming
3.3.1. Setting the Clock
On the System Screen, access the Clock setup screen.
Clock Setup Screen
Use the cursor keypad to modify the field value and accept your entries. When editing is
complete, do one of the following:
• Select the SET RD CLOCK option to synchronize all gas monitors to the current date/time
setting.
• Select the ESC option to cancel all edits and revert to the previous setting.
• Press ENTER to accept the current date/time setting.
3.3.2. Navigating to the 1
st
MZ-RD Setup Screen
On the System Screen, select MZ-RD SETUP to access the MZ-RD Setup Screen #1.
MZ-RD Setup Screen #1