MZ-RD – Multi-Zone Remote Display
Instruction 3015-5157 13
3.3.3. Num Monitors on Net
This is the number of gas monitors connected to the MZ-RD.
NOTE: When first powered up, the MZ-RD will automatically detect all gas monitors
on the network with unique node addresses. Refer to Gas Monitor Node Address.
3.3.4. Monitor Baud
This is the baud rate of all gas monitors connected to the network. The default valve is 19200.
NOTE: All gas monitors on the network must have the same baud rate.
3.3.5. Audible Alarm
To Next Page
Loading...