PAGE 55
Torque value:
• Engine mounting bracket bolt 19 ft/lbs.
• Apply sealant to the screw.
• Apply sealant to the propeller shaft flange coupling bolts.
• Tighten them to the standard torque.
• Apply sealant to the front propeller shaft flange coupling bolts.
Torque value:
• Tighten them to the standard torque.
• Front and rear propeller shaft flange coupling bolt: 32.5 ft/lbs.
Exhaust Installation, Removal:
• Install the new gasket
• Apply sealant to the muffler mounting bolt
• Install muffler.
• Tighten the exhaust pipe nuts and muffler bolts to
specified torque.
To Next Page
Loading...
