PAGE 89
Precautions in Operation:
General Information
Refer to chapter 17: The troubleshooting and inspection of alternator
Refer to chapter 17: The service procedures and precaution items of starter motor
Specifications:
Item Standard Value (mm) Limit (mm)
ID of starting clutch gear 29
OD of starting clutch gear 52.548-52.445
Torque value:
• Flywheel nut 85 ft/lbs
• Flywheel nut not to be reused. Should be replaced when disassembled
• Coat starting clutch hexagon bolt with adhesive 30-34 ft/lbs
Tools:
• Special tools
• A.C.G. flywheel puller: 440659
To Next Page
Loading...
