Base Usage
Prerequisites
For Flex to operate as a base, the following items are required:
● Flex extreme
● Radio kit
● Range pole with bipod or tripod attachment, securely mounted
● FCC license & radio channel programming
● Optional external power
When attaching the radio kit to the base pole, ensure the antenna of the radio antenna does not
extend above the base of the antenna cap as shown in the section Rover Usage.
Radio Connection Setup
● TX power level
● Range testing
Configuration
Loading Known Points
Constructing a Known Point File
Loading a Known Point File on Flex
Standalone Configuration
The Bad Elf Flex supports operating in Base mode without the use of a connected app. A
standard checklist interface provides for quick startup and configuration of Flex as an RTK
Base. Starting the Base feature enables wireless transmission of a high-accuracy corrections
feed via a Flex radio.
Note: Many of the Flex UI options are disabled while the Flex is operating in Base mode to
ensure maximum stability of the base while in operation.
Navigating the base feature
● Left and right arrow buttons select the previous or next display screen
● Enter button selects items or provides a context menu
● Back button returns to the previous item
Copyright © 2022. Bad Elf, LLC. 32
All Rights Reserved.
To Next Page
Loading...
