Baehr BaehrTec A1200 - Page 26

Operating Manual BaehrTec A1200 / A2000
Page 26/64 English – V100 - Date 09/2017
max. instrument diameter no greater than 12 mm
Warning: Always observe the maximum permissible
instrument diameter and the respective maximum
permissible speed of the instrument manufacturer.
Please ensure that this is never exceeded since it can
result in serious injuries to the patient and the
operator. Vibrations can also occur at the handpiece.
Please keep your safety and the safety of your patient
in mind.
Fig. 12
Do not use any instruments that are larger than those shown on the front panel of the
device!
Only use diamond and rust-safe
cutters
(not greater than illustrated)