Operating Manual BaehrTec A1200 / A2000
English – V100 - Date 09/2017 Page 51/64
Fig. 29
Checker that the functioning is back to normal by pushing the button pusher with your finger.
Fig. 30
5.5.3 Changing the dampers for the handpiece case
If you notice that the handpiece motor no longer sits comfortably in the handpiece case, this
means that the dampers for the handpiece case are worn.
To change the dampers for the handpiece case, please proceed as follows:
Switch off your device at the main switch and disconnect the device from the mains.
Unscrew the handpiece case from the handpiece cap.
Fig. 31 Fig. 32
To Next Page
Loading...