Operating Manual BaehrTec A1200 / A2000
English – V100 - Date 09/2017 Page 33/64
4.6 Home function (button (17))
This button has two functions:
By briefly pressing the Home button you will be taken directly from the options menu to the
Work mode (see section "Work mode").
By pressing this button for approximately 5 seconds, the base settings made by the factory
will be restored:
• Speed of the handpiece motor = 6,000 rpm
• Instrument rotation direction = clockwise
• Suction level = 4+
• Language = German
• Sound = Aqua
• Background colour = white
The set-up of the base settings cannot be changed.
By pressing the button for approx. 5 seconds all setting are reset (also the
values of the memory buttons) to the factory settings.
The information (meter readings, etc.) will, of course, remain unaffected.
4.7 Memory buttons (buttons (29) - (31))
Your device has two (A1200) or three (A2000) memory buttons which you can use to save
your preferred settings in Work mode. These settings will be retained even if you turn off the
device.
In order to save settings, please set them (instrument rotation speed, instrument rotation
direction and suction level) in Work mode and hold the memory button where you would like
to save these settings for more than 2 seconds. Once the settings are saved, you will hear a
sound and the respective memory storage space is shown on the display.
All memory buttons are factory pre-set as follows:
• Handpiece motor speed: 6,000 rpm
• Handpiece motor direction: right
• Suction level: 4+
Please note that the selected adjustments are saved if you keep the memory
button pressed for longer than 2 seconds. This means that settings saved to
this memory button will be lost.
In order to recall settings that were saved on a memory button, briefly press the desired
memory button. The saved settings are then applied. This will be indicated to you on the
display by showing the corresponding memory button.
Please note that when briefly pressing the memory buttons, you will only
hear a sound once you remove your finger from the button.
To Next Page
Loading...