EasyManua.ls Logo

Baehr BaehrTec A1200 - General Product Description and Application Purpose; Operator Requirements; Staff and Patient Protection

Baehr BaehrTec A1200
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Manual BaehrTec A1200 / A2000
Page 10/64 English V100 - Date 09/2017
2.3 General product description and application purpose
The BaehrTec A1200/A2000 foot care device is intended for use in medical foot care. It must
only be used by trained professionals.
Rotating instruments (grinder, files, etc.) are actuated with the BaehrTec A1200/A2000. These
can be used to strip away hard skin, calluses, nails etc. and remove corns.
In detail, the A1200/A2000 is intended for the following:
for cleansing and milling the nail fold and removing ingrown nails
to smooth and strip away mycotic and non-mycotic nails
to polish non-mycotic nails where necessary
to remove deep callosities or clavi using the hollow cutter
milling and smoothing the areas around the digit if these are macerated or calloused
to smooth plantar soles with the twister or the cutting grinder
Drill through the nail with a round or hollow drill with grinders for clavi or subungual
haematoma
to roughen the nail in preparation for brace correction
for preparation in the event of whitlow
to remove severe plate-like callosities
Other types and fields of application are carried out at your own risk, and may conceal
dangers. No form of misappropriation is permitted.
Improper use may lead to damage to persons or objects.
The manufacturer cannot be held responsible for damages caused by improper use,
unqualified staff or incorrect operation.
All warranty claims are void following improper use or opening the
device.
WARNING: This device may not be altered without the permission of
the manufacturer.
2.3.1 Operator requirements
This device must only be used by trained and instructed podiatrists, medical chiropodists,
doctors or persons in related occupational categories. They must be familiar with the
appropriate working method and have a relevant qualification.
The operator is obliged to/must ensure that
only fault-free and flawless work equipment is used
protects himself, the patient and others from dangers
contamination through the device is avoided
2.3.2 Staff and Patient Protection
It is essential that you read this section with the utmost care! It contains
important information on protecting yourself, others and the device
from damage!

Table of Contents