Operating Manual BaehrTec A1200 / A2000
Page 6/64 English – V100 - Date 09/2017
CE mark (Communauté Européenne) with the number of the certification authority. A product
bearing this mark meets the requirements of the corresponding EU guideline (the applicable
European Standard).
Application part of type B
This application part guarantees protection against electric shock due to the compliance of
the leakage currents with standards (Type B).
It is a mandatory requirement that these operating instructions are read and observed before
using the device.
Electrical/electronic waste. Devices with this mark must be disposed of properly and must not
be put in household waste.
This symbol indicates which fuse(s) is are used in the device.
Protection class II
This is a device of protection class II with functional earthing.
ON (max) / OFF (min)
Indicates how the device should be operated.
The following applies to the device:
Operating time: 15 minutes (maximum) pause time: 10 min (minimum)
These approved operating times correspond to the common work procedure in
podiatry/pedicure.
Functional earthing
This symbol indicates that the power supply is earthed (the rpm is located directly on the
power supply unit).
Manufacturer
2.1.3 Symbols on the packaging
Transport upright (up = in direction of arrow)
To Next Page
Loading...