Start and driving 141
D50
3
Driving guide
When the manual shift mode needs to be
withdrawn, the shift lever is pulled to the right
and hung to the "D" gear. At this time, the
transmission enters the automatic shift mode.
Shifting Reverse gear
1. Stop the vehicle.
2. Press on the brake pedal and press the lock
button on the left side of the shift lever handle,
and then hang the shift lever into the "R" gear
position.
3. After the gear is put in, the brake pedal is
slowly loosened and the accelerator pedal is
pressed in time, so that the vehicle can be
backed up.
At this time:
●
Reversing signal lights on.
●
Rear-view system starts automatically and
displays image in multimedia display screen
(suitable for some models).
●
When parking
，
the parking radar starts and
sound alarms at different frequencies during
approach obstacles .
Warning
●In the course of driving, do not suddenly
switch the shift handle to "R" or "P"
gear, transmission will be damaged, or
even accident.
●Please don't hang in "N" to stop taxiing
while the vehicle is running.
Notice
●According to the change of resistance
(such as traction, climbing the long slope,
etc.), the vehicle will start the
corresponding shift procedure, and
provide greater power to the vehicle by
shifting into the lower gear, so as to
prevent frequent shifting.
●The speed of cold engine is very high
when it is first started, so before the
engine is preheated, please be careful
when shifting "D" gear or "R" gear.
●Do not up the engine speed when the
vehicle stops, otherwise it may cause the
vehicle to move unexpectedly.
●Before starting the engine, make sure
that the gear is in "P" or "N" gear. Do not
attempt to start the engine in other gear.
●When shifting handle is shifted from
"N" gear to other gear, please keep the
To Next Page
Loading...
Need help?
General
