BAIC D50 Series User Manual

136 Start and driving
D50
3
Driving guide
Start / stop button
Start / stop button are at right of steering wheel
on the instrument.
Power mode switching
Automatic Transmission: Do not depress the
brake pedal, move the shift lever in the "P" or
"N" gear position; Manual Transmission: Do not
depress the clutch pedal; Press Start / stop
button, the power supply mode switch will be in
the following order:
If the button is not pressed: start / stop button is
off, which is the "OFF" mode (button’s
background light does not shine);
●If the button is pressed once: the "RUN" mode
will be on (button’s background light is green),
with the instrument lights on, all electrical
equipment in the ON state;
●If the button is pressed twice: it turns on the
"ACC" mode (button’s background light is red),
circuits concerning the CD player, cigarette
lighter and other accessories will be switched
on.
●Press the button for the third time: returns to
the "OFF" mode (button’s background light is
off).
Successively pressing the start / stop button
switches among these three modes "OFF" →
"RUN" → "ACC" circularly.
Tips
●Automatic Transmission: The shift lever
in the "P" or "N" gear position, depress
the brake pedal to start the engine.
●Manual Transmission: depress the
clutch pedal to start the engine. For safety
reasons, strongly recommend that the
gear position is in "P" gear or "N" gear,
before starting the engine.
●Press down the Start/Stop button to
switch over between power modes and
perform the Start/Stop function. However,
it is necessary to ensure that the smart
key is placed in an area where on-board
antenna signals can effectively reach (not
including the trunk).

BAIC D50 Series Specifications

General

Brand	BAIC
Model	D50 Series
Category	Automobile
Language	English