Tires and wheels 205
D50
4
Maintenance
Check tires and wheels
Wheel and tire appearance inspection
Defective tires are very dangerous! If a tire is
damaged, excessively worn or with abnormal
pressure, please do not drive, and contact the
authorized BAIC dealership as soon as possible
for repair.
If the vehicle in the process of running in the
vibration, noise, driving deviation situation
，
this
indicates that one of the wheels may have
malfunctioned, You should be very careful when
parking by the side of the road.
Check the wheels and tires for damage, If
necessary Please contact authorized BAIC
dealership to Replace the tires.
The most common causes of tire
ineffectiveness:
● Impacting or friction with curbs;
● Driving over deep pits on the road;
● Tire pressure being too low or too high.
Check tread pattern depth and tread condition
throughout tire width regularly too low tread
depth will reduce tire adhesion. Especially on
wet road, it will increase the risk of water slide
and seriously affect the safety of driving
The original tire has a tire wear indication mark,
the mark is at the bottom of tread pattern and
distributed on the circumference of the tire
If the tread is worn to the mark, replace the tire.
Check that all wheels are fitted with valve caps,
and check that the valves are dirty and air leaks
Check the condition of the rim, if the rim
appears distortion, cracking, corrosion or severe
abrasion phenomenon, should be replaced in
time. If the wheel nut is often loose, replace the
wheel and wheel nut
Warning
●The tire cannot continue to drive after
the appearance of bulge, cracking and so
on, Because there may be a flat tire while
driving, Thus causes the traffic accident,
causes the personnel injury.
To Next Page
Loading...
Need help?
General
