Windshield washing liquid and wiper blade 203
D50
4
Maintenance
Replace the Windshield Wiper Blades
Notice
●Wiper blades must be kept in good
condition.
● Wiper blades must be kept in good
condition. To prevent the formation of
streams, the wiper blade should be
regularly Cleaned using a windshield
cleaning agent. At the same time you also
need to clean the windshield.
●If the weather is cold, every time before
you clean the windshield with windshield
washer, you shall Check whether the
wiper blades are frozen. You can operate
the wiper handle only in the case of the
wiper blades not being interfered and
obstructed.
If there is a frictional sound in the wiper blade,
it may be caused by the following factors:
● When the vehicle is washed inside an
automatic washing device, hard wax residues
are fixed to the windshield glass. Such hard wax
residues can only be cleared using a special
cleaning agent.
● If the wiper blade is damaged, it may generate
a frictional sound. At this time, the wiper blade
should be replaced.
● There is dust or debris on outer surface of the
windshield.
● Orientation angle of the wiper arms is
incorrect. If this happens, please go to the
authorized BAIC dealership for check and
adjustment of the orientation angle.
It is necessary to regularly check the wiper
blade and replace the wiper blade as required.
Otherwise, it will damage the front and rear
windshield.
1. Lift the wiper arm away from the windscreen.
Notice
●You must use the key to turn off the car
power to prevent inadvertent triggering
To Next Page
Loading...
Need help?
General
