Spare wheel and on-board tools 219
D50
5
Emergency handling
Tools attached with vehicle
The on-board tool kit is placed in spare wheel
rim, and you can see it after lifting up the trunk
carpet.
Tips
●After the on-board tools are used, please
properly store them, so as to eliminate
abnormal noise and facilitate the use in
Open the tool box, the tools used are as follows:
①
②
③
Wheel
installing/dismantling
④
⑤
⑥
Wheel nut cover
dismantler
Reflective vest
The glove box is equipped with a reflective vest,
which can be used by drivers to deal with
vehicle faults at night or in low visibility
conditions to improve the recognition of drivers
under the vehicle.
Warning
●The improper use of jack may cause
serious injury.
●The jack is a lifting device provided for
replacement of wheel under emergency
circumstances. It may not be used to
support the vehicle for long time, and only
one wheel may be lifted up every time.
●The jack may only be used for
replacement of wheel. The jack may not
be used to lift up any other heavy article
or vehicle.
●The jack may be used only on flat and
solid ground.
●When using the jack, don’t start up the
engine, otherwise accident may occur.
●When using the jack to lift u
vehicle, be sure not to place any portion of
your body under the vehicle, otherwise
accident may occur.
●If it is necessary to carry out operation
under the vehicle, be sure to place the
appropriate support under the vehicle.
To Next Page
Loading...
Need help?
General
