Cruise control 157
D50
3
Driving guide
Setting speed Cruise*
General description
Vehicle constant speed cruise system is a system
that uses electronic program to control the
throttle to keep the vehicle running at constant
speed automatically. After using the constant
speed cruise function in long-distance driving
on expressway, the driver can keep driving at
the set speed without press on the accelerator
pedal, thus reducing driving fatigue and
improving driving comfort.
The control condition of constant speed cruise
：
●The constant speed cruise only works when
the speed is between 40 km/h and 130 km/h.
The speed is not within this range, so the
constant speed cruise cannot be entered.
●The shift handle is in "D" gear (automatic
transmission) or above 3 gear (manual
transmission).
●Failure to meet any conditions leading to
cruise withdrawal (e.g. press on the brake
pedal).
●Constant speed cruise control function must be
selected.
Warning
●When driving on heavy traffic roads,
windy areas, rough roads, wet and
slippery roads such as rain, snow, ice, etc.,
do not use the constant speed cruise
function in order to avoid vehicle out of
control and cause accidents.
●The set cruise speed and the distance
from the front car must be compatible
with the traffic conditions at that time.
The constant speed cruise system is only a
driving assistance system and should be
used with caution.
●Cruise system should be shut down in
Cruise start
1. Press the switch button and turn on
the cruise function. At this time, the green cruise
in the combined instrument the flight
indicator lights up and flickers.
2. Increase vehicle speed to cruise start speed
(no less than 40 km/h)
3. Pull down the cruise setting button
"to set the vehicle to cruise at the current speed,
and the cruise indicator in the instrument will
become long bright. If the speed memory is not
cleared, the last memory speed cruise will
be restored by pushing the cruise
recovery button upward.
To Next Page
Loading...
Need help?
General
