158 Cruise control
D50
3
Driving guide
4. Loosen the accelerator pedal and the vehicle
enters the cruise control state.
Reduce cruise speed
In a constant speed cruise, the set key can be
pushed downward to reduce
1. Pull down the cruise speed setting
key to reduce the cruise target speed by 2 km/h
2. Press the cruise speed setting key
downward for a long time, and the speed will
decrease continuously but not less than 40 km/h.
Release the button, will be in accordance with
the new set speed to achieve automatic cruise.
Increase cruise speed
3. Pull up the cruise speed setting key
4. Press the cruise speed setting key upward for
a long time, and the speed can be continuously
increased but not higher than 130 km/h.
Release the button and realize automatic cruise
according to the newly set speed
Overtake
When overtaking is required, press on the
accelerator pedal to accelerate and exceed the
cruise speed (as usual overtaking). After
releasing the accelerator pedal, the vehicle will
gradually resume the cruise speed set before.
To Next Page
Loading...
Need help?
General
