146 Parking
D50
3
Driving guide
Parking way
1. Stop the vehicle and apply parking brake to
confirm the reliability of parking brake.
2. For automatic transmission vehicle, shift
handle is placed in "P" gear position.
For manual transmission vehicle, according to
the safety needs of parking position: Put the
shift handle in the appropriate gear position (flat
ground: neutral; uphill: 1 gear; downhill:
reverse gear).
3. Check that all lights and electrical equipment
are closed. Make sure the skylights (if equipped)
and windows are closed. Stop the engine.
4. Carry valuables and car keys with you and
lock all doors. See the anti-theft indicator light
flickers at low frequency on the instrument, it
indicates that the anti-theft system has been
activated.
5. When parking on the ramp, in order to
prevent the vehicle entering the road, turn the
steering wheel according to the graphic
requirements. When parking on steeper slopes,
should block the wheel by a block.
When parking on a downhill road with road
stones, turn the steering wheel to make tire
towards the road stones.
When parking on an uphill road with stones,
turn the steering wheel to make tire move away
from the road stones.
To Next Page
Loading...
