216 Anti-corrosion of vehicle
D50
4
Maintenance
Anti-corrosion measures
Ensure that vehicle is not corroded
●
Clean up and wax the vehicle from time to
time, so as to keep the vehicle clean.
●
Inspect whether there is minor damage on
painted surface damage from time to time, and
carry out repair as soon as possible.
●
Inspect the bottom of vehicle for accumulation
of sand, contaminant or salt. If there is any sand,
contaminant or salt, please flush the bottom
with water as soon as possible.
Notice
●It is prohibited to directly flush the
passenger compart
the purpose of clearing away dirt, sand or
other debris. Please use vacuum cleaner
or broom to clear away the dirt.
Don’t let water or other liquid direct
contact with electrical components;
otherwise the electrical components may
The anti-freezing agent and snow-melting agent
used on road are corrosive, and they may
accelerate the corrosion and aging of
components on vehicle bottom such as exhaust
system, parking brake handle cable, brake pipes,
bottom plate and fender. Therefore, after driving
the vehicle on such road, please clean up the
bottom of vehicle in time.
As for other anti-rust and anti-corrosion
measures, there may exist special requirements
in some areas. Please consult with the
authorized dealer of BAIC.
Most common factors for corrosion of vehicle
●
The wet dirt or debris is accumulated in cavity
on vehicle body or other locations.
●
The paint or other protective coating is
damaged owing to sand, small stone or minor
traffic accident
To Next Page
Loading...
Need help?
General
