204 Windshield washing liquid and wiper blade
D50
4
Maintenance
2. Lift the wiper arms and make them away
from the windshield.
3. Press the locking spring, push the wiper blade
assembly to the bottom of the wiper arms, and
then demount the wiper blade assembly by
rotating.
4. Wiper blades can be installed in the reverse
order. Before installation of the new wiper
blades is completed, do NOT power the whole
vehicle.
Warning
While driving, be sure to clean all vehicle
window glass to maintain good vision!
● Regularly clean the wiper blade and all
vehicle window glass.
● The wiper blade should be replaced one
or twice a year.
● Please try to avoid the wiper blades
dryly wiping the windshield to prevent
rubber aging, wear and fluff on the
window, which Will affect driving safety.
Notice
●Before replacement of the wiper blades
is completed, do NOT power the whole
vehicle, to avoid sudden movement of the
Wiper blades, which may damage the
windshield and engine cover.
● After demount the wiper blade
assembly, you shall especially look out the
wiper arms to avoid sudden rebound of
wiper arms, which may damage the
To Next Page
Loading...
Need help?
General
