16 Seat belt
D50
1
Safety operation instruction
Seat belt height adjustment
Use the seat belt height adjustment device to
adjust the height of the fulcrum on the seat belt
to accommodate the shoulder height of different
driver and passenger.
1. Press the upper lock button of the guide block
and hold it, move the guide block up and down,
and adjust the seat belt to the proper position.
2. Release the guide block
3. After completing the height adjustment, pull
the seat belt hard
Warning
●The driver is forbidden to adjust the seat
belt height while driving.
Seat belt pre-tightening force limiting
function
Some models’ seat belts are equipped with
pre-tightening force limiting devices, which
aimed to ensure that the seat belt fastens the
passenger's while crash.
When the severity of the crash accident reaches
a certain level, the pre-tightening force limiting
device may be activated, and the retractor
tightens the seat belt in the rewinding direction
to slow the passenger's forward motion.
If the tightening force exceeds a certain limit,
the force limiting device will release the seat
belt and reduce the force acting on the body.
When the pre-tightening force-limiting device is
triggered, white smoke may be emitted. This is a
normal phenomenon. It does not mean that the
car has a fire, so don't worry.
To Next Page
Loading...
Need help?
General
