Tires and wheels 207
D50
4
Maintenance
2. Press the tire pressure gauge to the valve with
force, and then the tire pressure will be
displayed.
3. Check and adjust the tire pressure until it
meets the standard Value. See wheel for tire
pressure standards to” Tire information label”.
After checking, be sure to cap the valve return
to valve port and initiate tire pressure system.
Tips
●After vehicle driving a period of time,
the tire pressure should increase by
0.2-0.5 bar. Check the tire pressure at this
time. Do not deflate the tire in order to
make the tire pressure measurement meet
the standard, otherwise the tire pressure
will be lower than the standard value in
Warning
●If the tire pressure is obviously
insufficient, the vehicle continues to run
at high speed, the tire will continue to
deform, easily lead to tire overheating,
Rotating tires
Regular rotating tires of the purpose is to make
all the tires wear evenly, prolong the service life
of the whole of the tire. Rotating tires shall be
carried out every 10000km or so.
Before rotating tires check whether the tire and
wheel are damaged. If not, perform rotating tires
and wheel positioning.
Notice
●The front wheels should be kept in
better condition when the wheels are in
transposition.
●If a tire wear is not uniform or excessive
wear, should go to authorized BAIC
dealership for wheel positioning.
To Next Page
Loading...
Need help?
General
