Seat belt 23
D50
1
Safety operation instruction
Seat belt maintenance
Regularly check that the seat belt and all its
components (such as buckles, bolts, retractors,
webbing and seat belt height adjustments) are
working properly
If the seat belt part is found to be damaged, the
webbing is cracked or otherwise damaged,
replace the entire seat belt assembly.
Please go to BAIC authorized Dealer as
soon as possible when the following
conditions occur:
An accident occurred in the front of the vehicle
(shaded in the picture), but the seat belt
pretensioner did not work.
An accident occurred in the front of the vehicle
(shaded in the picture), but the seat belt
pretensioner did not work.
When performing any work on the belt retractor
with pre-tensioning device, please carry it out
by BAIC authorized Dealer. Otherwise, the
pre-tensioning device may not work properly in
the event of an accident.
When you need to scrap the pretensioner, you
must abide by the relevant safety regulations.
The BAIC authorized Dealer is familiar with the
relevant safety regulations and can provide you
with inquiries.
Warning
●If the seat belt retractor is repaired by a
repair shop or non-professional
authorized by BAIC, or if the seat belt
retractor is not used properly, the
potential risk of accidents w
increased.
●It is not permissible to repair,
disassemble or install the seat belt or seat
belt retractor parts by yourself.
To Next Page
Loading...
Need help?
General
