EasyManuals Logo

BAIC D50 Series User Manual

BAIC D50 Series
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Airbag system 25
D50
1
Safety operation instruction
Airbag working Conditions
Start, when the start/stop button is in RUN
mode;
On the cluster instrument, the airbag system
fault warning light must be in a normal state
(normal state: after starting the vehicle, the
alarm light is turned off after a few seconds, and
is extinguished in normal use).
If there is no water immersion in the passenger
compartment of the vehicle, if the vehicle is
immersed in water, the airbag controller may be
short-circuited and the airbag system may not
work properly.
Airbag System Fault Warning Light
The airbag system fault warning light on the
instrument cluster will remind you any fault in
the airbag system.
When the ignition switch is at the “ON”
position or when the Start/ Stop button is in the
Run mode, the warning light will go off after
being lit for several seconds when the system
performs self-detection.
If the following symptoms occur, it shows that
the system is faulty and the airbag and seat belt
pre-tensioner may not work normally in a
collision. In such a case, you must go to an
authorized BAIC dealership to arrange a check:
●When the ignition switch is at the “ON”
position or when the Start/Stop button is in the
“Run mode, the airbag fault warning light is
not lit.
●When the ignition switch is at the “ON”
position or when the Start/ Stop button is in the
“Run mode, the warning light is on for long
time
●While the vehicle is running, the airbag fault
warning light is lit.
Airbag Repair, Maintenance and Disposal
Components of the airbag system are mounted
in different positions around the car. All
operations of the airbag system or operations
that require the dismantling of airbag system
components to allow the repair of other vehicle
components must be performed by professional
persons. Otherwise, the airbag system may be
damaged. As a result, in the event of an accident,
the system may abnormally trigger the airbag or
fail to trigger the airbag at all.
If the vehicle is scrapped, the unexpanded
airbag is potentially dangerous, so when the
vehicle is scrapped, the airbag must be safely
detonated by a professional.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BAIC D50 Series and is the answer not in the manual?

BAIC D50 Series Specifications

General IconGeneral
BrandBAIC
ModelD50 Series
CategoryAutomobile
LanguageEnglish

Related product manuals