Instrument and control system 55
D50
2
Operation system and specification
Average fuel consumption 2
In the display of average fuel consumption 2
surface, average fuel consumption 2 reading can
be reset to “0” by long press “RESET” button.
The fuel consumption 2 reading will be reset to
“0” as well when the battery is power off.
Instantaneous fuel consumption
Instantaneous fuel consumption display the
average fuel consumption at one moment during
the running, the unit is L/100Km.
Maintenance mileage
Maintenance mileage represents the mileage the
car will run before the next maintenance
schedule. The first maintenance mileage is
5000Km, the interval maintenance mileages
5000Km. The users are suggested to check it
regularly and do the maintenance on time.
Long press the RESET button for more than 10
Seconds, switch the Stat/Stop button to ‘OFF”
mode and then switch it to “RUN” mode
immediately, press RESET INFOR for more
than 10 Seconds, maintenance mileage will be
reset
To Next Page
Loading...
Need help?
General
