Balluff BNI EIP-50 105-Z015 Series - Page 44

7．EtherNet/IP Connection Procedure
41
5
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
6
The dialog box on the right is
displayed. Confirm that there is
no problem, and click No.
*Do not automatically create a
tag set from the tags you
import.
7
Click the Tag Sets Tab in the
Edit Device Parameters Dialog
Box.
Click the In - Consume Tab,
and then click Edit Tags.
*Follow steps 7 to 14 to
register the input tag set of
Controller (Node 1).