7．EtherNet/IP Connection Procedure
4
The Monitor Device Dialog Box is
displayed.
Check that the following check
boxes are selected in the Status 1
Tab Page.
・On-Line
・All Tag Data Link
・Tag Data Link
・Ethernet Link Status
Check that the target node status
is displayed as shown on the right.
Click Close.
Select Disconnect from the
Network Menu.
Check that the color of the network
connection icon changes to gray
on the EtherNet/IP_1 Tab of the
Network Configuration Pane.
*It indicates that Network
Configurator and Controller are
Select Exit from the File Menu to
close Network Configurator.
Number: Node number
Blue: Connection normal
To Next Page
Loading...
