Balluff BNI EIP-50 105-Z015 Series - Page 59

7．EtherNet/IP Connection Procedure
56
9
Check the Ports 0-7 statuses of
Network Module.
Check that the following online
values of the variables are
displayed.
EIP002_IOLink_port0_1_IN[32]:
0000 0011 (Port 0 in IO-Link mode)
EIP002_IOLink_port0_1_IN[80]:
0000 0000 (Port 1 in Standard I/O
mode)
EIP002_IOLink_port2_3_IN[32]:
0000 0000 (Port 2 in Standard I/O
mode)
EIP002_IOLink_port2_3_IN[80]:
0000 0000 (Port 3 in Standard I/O
mode)
EIP002_IOLink_port4_5_IN[32]:
0000 0000 (Port 4 in Standard I/O
mode)
EIP002_IOLink_port4_5_IN[80]:
0000 0000 (Port 5 in Standard I/O
mode)
EIP002_IOLink_port6_7_IN[32]:
0000 0000 (Port 6 in Standard I/O
mode)
EIP002_IOLink_port6_7_IN[80]:
0000 0000 (Port 7 in Standard I/O
mode)