(800) 543-8390 FAX (859) 727-8506 www.balluff.com
AOI_BNI006A_50_31_040 User Guide Page 20 of 26
5.4.1.2
While any Balluff device is connected to Port 1 while this port is in IO-Link mode, the displayed
Vendor ID should be 0378h or in decimal of 3(120). These values bit can be viewed in the
Controller scope tags as shown below (the two screen shots are identical except for the “Style”
column):
Note that this screen shot and the following screen shot display the same information except that two tags
have been changed to Hex format.
To Next Page
Loading...
Need help?
General
