Balluff BNI006A User Manual

(800) 543-8390 FAX (859) 727-8506 www.balluff.com
AOI_BNI006A_50_31_040 User Guide Page 24 of 26
7.0 Definitions
7.1 The following terms are used in this guide with these definitions:
7.1.1 Controller Organizer – the area of RSLogix5000 where all project components can be accessed.
If this toolbar is not visible, it can be opened by pressing Alt+0.
7.1.2 AOI – Add On Instruction – reusable software module created with RSLogix5000. Balluff’s AOI
modules are composed of UDTs and associated logic to implement control algorithms. This
module is hardware specific. All AOI modules contained in a project will be located in the
Controller Organizer as shown below:
7.1.3 Controller scoped tag – a tag of any valid data type that is available to all programs within a
project and must be used uniformly throughout the entire project.
7.1.4 AOI Parameter – a tag of any valid data type that is created during the definition of the AOI
module and is isolated to that AOI. Its scope is limited to the each discrete use of AOI function.

Balluff BNI006A Specifications

General

Brand	Balluff
Model	BNI006A
Category	Control Unit
Language	English